ARP 2600M+ ARP 2600 Module - Limited Edition

561221

ARP 2600 Semi-modular Synthesizer Module

More details

Not yet available

Availability date: 2022-03-11

MUSICGOODDEAL PRICE
1 499,17 €

Public Price
1 665,83 €

You save
166,67 €

YOU BENEFIT FROM THE FREE DELIVERY FOR FRANCE AND GERMANY FOR THE OTHER DESTINATION THE CALCULATION WILL BE DONE IN THE BASKET.
3 Years Musicgooddeal Warranty

FINANCE AT YOUR RHYTHM:
3X 499.72€ No charges !
4X 374.79€ No charges !
PayPal Logo

More info


** Many improvements**

For this Module version, KORG has taken the control further allowing for example to plug in a USB keyboard in Plug and Play or even the SQ-64 sequencer. You will also be able to control in DC the Pitch Bend, modulation, and Portamento ON/Off

** The first 1000 will be rewarded¨¨

To celebrate this rebirth, ARP will deliver the first 1000 units with a specially designed carrying case, as well as a KORG MicroKey2-37 master keyboard



- Category: Analog Synth

- Synthesis Type: Analog

- LFO: 3

- Filters: Low Pass

- Inputs: USB, Sustain pedal, Midi, Audio in, CV in, Gate in, Trig in, USB Midi

- Outputs: Midi, Headphone, Audio, USB/Midi, Analog, CV out, Gate out

- Software provided: Korg bundle

- Wrapper: ADSR, Attack - Release

- Included accessories: Patch cables, AC power supply, Semi-rigid case

- Sound generator: VCO

- Dimensions (mm): 520 × 129 × 311 mm

- Weight (kg): 5.90 kg

- Sequencer: No

- No. of effects: 1

- Max polyphony: 2

- Additional Specs: Accepted temperature in use: 0 - +40 °C (non-condensing)

Max polyphony: 2 notes in duophonic, normally monophonic.

VCO-1 (Voltage Controlled Oscilator 1)

Waveforms: sawtooth, square

Frequency range:

Approx. 0.03 Hz - 30 Hz (low frequency mode)

Approx. 10 Hz - 10 kHz (audio mode)

Control voltage: 1 V/oct.

VCO-2 (Voltage Controlled Oscilator 2)

Waveforms: sawtooth, pulse (dynamic), triangle, sine

Frequency range:

Approx. 0.03 Hz - 30 Hz (low frequency mode)

Approx. 10 Hz - 10 kHz (audio mode)

Pulse width: 10% - 90%

Control voltage: 1 V/oct.

VCO-3 (Voltage Controlled Oscilator 3)

Waveforms: sawtooth, pulse (dynamic)

Frequency range:

Approx. 0.03 Hz - 30 Hz (low frequency mode)

Approx. 10 Hz - 10 kHz (audio mode)

Pulse width: 10% - 90%

Voltage control: 1 V/oct.

VCF (Voltage Controlled Filter)

Type: low pass (TYPE I: first 24 dB/oct.,

TYPE II: second 24 dB/oct.)

Frequency range: Approx. 10 Hz - 10 kHz

Resonance: 1/2 - self-oscillation

VCA (Voltage Controlled Amplifier)

Control voltage:

AR type (internally connected)

ADSR type (internally connected)

Noise generator: Spectral Noise (White and Pink)

RING MODULATOR

Type: analog multiplier

Input signal (internally connected): VCO-1 sawtooth, VCO-2 sinusoidal

SAMPLE & HOLD

Sampled signal: Noise (internally connected)

Tools:

AUDIO JACKS OUTPUTS

Front panel (left - right output jacks)

Connectors: φ3.5 mm monaural

Maximum output level: +9 dBu @ 10 kΩ load

Output impedance: 1.2 kΩ

Right side

Connector: XLR

Maximum output level: +4 dBu @ 600Ω load

Output impedance: 1.2 kΩ

HEADPHONE OUTPUT

Connector: stereo jack φ6.3 mm

Maximum output level: 50 mW + 50 mW @ 33Ω load

Output impedance: 20Ω

External audio input (Preamplifier input ) JACK

Connector: φ3.5 mm mono jack

Maximum input level: -10 dBu

Input impedance: 100 kΩ

MIDI connector: IN, OUT, THRU

USB port: Type B

ARP 3620 (keyboard )

Keyboard: 49-note (with aftertouch, no velocity)

CV output voltage:

Upper voice -3 V - +10 V, 1 V/oct.

Lower voice -3 V - +7 V, 1 V/oct.

LFO output voltage:

Triangle ±5 V, 10 Vp-p

Square +10 V, 10 Vp-p

Sinusoidal ±3 V, 6 Vp-p

External vibrato: input voltage: Max. ±10 V

VIBRATO DEPTH slider: Max. 1 octave

VIBRATO DELAY slider: 0 - 2.5 sec

LFO SPEED slider: Approx. 0.25 - 25 Hz

PITCH BEND control: ±1 octave

Transposition switch: ±2 octave

PORTAMENTO speed slider: Max.25 msec/oct

Minimum speed: about 0.5 sec/oct

Recommended foot switch for PORTAMENTO: KORG PS-1/PS-3

Recommended foot switch for INTERVAL KORG PS-1/PS-3

Output voltage of the

(on the ARP 2600 FS panel): 0 V keys raised, +10 V key pressed

TRIGGER output voltage

(on ARP 2600 M panel): +10 V, 0.5 ms pulse wave key pressed

General

Mains power supply: AC power

Consumption: 30 W