Capturing the best of the UHF-R, ULX-D, and Axient series, the Axient Digital, the new flagship of Shure's wireless systems, has been designed to address the drastic reduction in usable spectrum and to meet the demands of current and future productions.
On order only In stock
On order only
Warning: Last items in stock!
Thanks to its revolutionary digital transmission mode, the spectral efficiency of the Axient Digital system allows for 23 channels per 8 MHz TV channel or up to 63 channels in high-density mode, satisfying ever-increasing frequency requirements.
Articulated around a common platform comprising an AD4D two-channel receiver and an AD4Q four-channel receiver, Axient Digital is offered with two transmitter families; the AD series naturally replacing the UHF-Rs and the ADX series incorporating all of the innovative technology and features of the Axient analog system.
With its very wide switching band, identical for both transmitters and receivers, Axient Digital facilitates fleet management and frequency coordination on tour.
The Axient Digital system is compatible with the Axient AXT600 Spectrum Manager, and with most existing Shure accessories.
Because of its scalable nature, the Axient Digital series provides a true answer to today's constraints and tomorrow's requirements.
High Performance RF
Innovative digital modulation process ensures robust transmission and long signal range.
Measurement and display of transmitted digital signal quality for added safety
Performance comparable to an analog system in noisy environments and at range limits
Combined digital True Diversity ensuring stronger resistance to stalls and other anomalies
Quadversity function allowing four receiving antennas to be assigned to a channel to increase coverage or cover two areas (AD4Q only)
High density mode drastically increasing the number of compatible channels
Fully transparent and musical sound: uniform frequency response - dynamic range > 120 dB ensuring excellent transient response
Very low 2 ms delay between capsule and analog output (standard mode)
Dante digital audio network (AES67 compatible)
AES3: 96 kHz or 48 kHz
AES-encryption.256 for secure transmission
Management and Control
Wireless Workbench 6 frequency coordination and network management software
ShurePlus Channel iOS app for mobile control and monitoring
AXT600 spectrum manager providing real-time spectrum monitoring and backup frequency distribution to various systems
Dante Browse function allowing listening to any channel Dante in the network
Dante Cue function for monitoring all channels from a single AD4D or AD4Q receiver
Power management through different networked chargers
Equipment and Scalability
Single platform of two receivers compatible with both AD and ADX series transmitter families
Extra wide RF bandwidth up to 184 MHz for all transmitters and receivers
Shure system using existing accessories: Antennas, Antenna Distributor, Access Point, Spectrum Manager, Chargers
- RF Bandwidth: 166 MHz (Transmitters and Receivers)
- Number of Compatible Channels per 8 MHz TV Channel:
- 23 in standard mode
- 63 in high density mode
- Group and channel frequency scanning
- Interference detection with alerts
- AES-256 format encryption
- Transmitter sync via IR link
- Frequency response: 20 Hz to 20 kHz
- A/D and D/A conversion: 24 bits - 48 kHz
- Analog output audio dynamic range: > 120 dB A-weighted
- Dante/AES output audio dynamic range: > 130 dB A-weighted
- Latency: 2 ms (standard mode) - 2.9 ms (high density mode)
Handheld transmitter equipped with a KSM9 static capsule with two hypercardioid / sub-cardioid polar patterns. Powered by a SB920 Lithium-ion battery. Showlink® remote control function. The ADX2 is equipped with contact pins that allow it to be inserted into a SBC240/240E charger dock for direct charging of the battery. Brushed nickel finish. Comes with two SB920 batteries and a WA371 mic clip.