ARP 2600M ARP 2600 Semi-modular synthesizer module

- Accessories included: Patch cables, AC power supply, Semi-rigid case

- Category: Analog synth

- Dimensions (mm): 520 × 129 × 311 mm

- Inputs: USB, Sustain pedal, Midi, Audio in, CV in, Gate in, Trig in, USB Midi

- Envelope: ADSR, Attack - Release

- Filters: Low-pass

- Sound generator: VCO

- LFOs: 3

- Software provided: Korg bundle

- No. of effects: 1

- Weight (kg): 5.90 kg

- Max polyphony: 2

- Outputs: Midi, Headphone, Audio, USB/Midi, Analog, CV out, Gate out

- Synthesis type: Analog

- Additional Specs:

- Accepted temperature in use: 0 - +40 °C (non-condensing)

- Max polyphony: 2 notes in duophonic, normally monophonic.

- VCO-1 (Voltage Controlled Oscilator 1)

* Waveforms: sawtooth, square

* Frequency range:

* Approx. 0.03 Hz - 30 Hz (low frequency mode)

* Approx. 10 Hz - 10 kHz (audio mode)

* Control voltage: 1 V/oct.

- VCO-2 (Voltage Controlled Oscilator 2)

* Waveforms: sawtooth, pulse (dynamic), triangle, sine

* Frequency range:

* Approx. 0.03 Hz - 30 Hz (low frequency mode)

* Approx. 10 Hz - 10 kHz (audio mode)

* Pulse width: 10% - 90%

* Control voltage: 1 V/oct.

- VCO-3 (Voltage Controlled Oscilator 3)

* Waveforms: sawtooth, pulse (dynamic)

* Frequency range:

* Approx. 0.03 Hz - 30 Hz (low frequency mode)

* Approx. 10 Hz - 10 kHz (audio mode)

* Pulse width: 10% - 90%

* Control voltage: 1 V/oct.

- VCF (Voltage Controlled Filter)

* Type: low pass (TYPE I: first 24 dB/oct.,

* TYPE II: second 24 dB/oct.)

* Frequency range: Approx. 10 Hz - 10 kHz

* Resonance: 1/2 - self-oscillation

- VCA (Voltage Controlled Amplifier)

- Control voltage:

* AR type (internally connected)

* ADSR type (internally connected)

* Noise generator: Spectral Noise (White and Pink)

- RING MODULATOR

* Type: analog multiplier

* Input signal (connected internally): VCO-1 sawtooth, VCO-2 sinusoidal

- SAMPLE & HOLD

* Sampled signal: Noise (internally connected)

- Tools:

* AUDIO JACKS OUTPUTS

* Front panel (left - right output jacks)

* Connectors: Jack φ3.5 mm monaural

* Maximum output level: +9 dBu @ 10 kΩ load

* Output impedance: 1.2 kΩ

- Right side

* Connector: XLR

* Maximum output level: +4 dBu @ 600Ω load

* Output impedance: 1.2 kΩ

- HEADPHONES OUTPUT

* Connector: stereo jack φ6.3 mm

* Maximum output level: 50 mW + 50 mW @ 33Ω load

* Output impedance: 20Ω

- External audio input (Preamplifier input ) JACK

* Connector: φ3.5 mm mono jack

* Maximum input level: -10 dBu

* Input impedance: 100 kΩ

* MIDI connector: IN, OUT, THRU

* USB port: Type B

- LFO output voltage:

* Triangle ±5 V, 10 Vp-p

* Square +10 V, 10 Vp-p

* Sine ±3 V, 6 Vp-p

- External vibrato: input voltage: Max. ±10 V

- VIBRATO DEPTH slider: Max. 1 octave

- VIBRATO DELAY slider: 0 - 2.5 sec

- LFO SPEED slider: Approx. 0.25 - 25 Hz

- PITCH BEND control: ±1 octave

- Transpose switch: ±2 octave

- PORTAMENTO SPEED slider: Maximum speed: approx. 0.25 msec/oct

- Minimum speed: about 0.5 sec/oct

- Foot switch recommended for PORTAMENTO: KORG PS-1/PS-3

- Foot switch recommended for INTERVAL KORG PS-1/PS-3

- Output voltage of (on ARP 2600 FS panel): 0 V keys raised, +10 V key pressed

- TRIGGER output voltage (on ARP 2600 M panel): +10 V, 0.5 ms pulse wave key pressed

- General

* Mains power supply: AC power

* Power consumption: 30 W