SHURE ULXD2-KSM8N-K51 Handheld Transmitter - KSM8 Nickel - K51 Band - 606 to 670 MHz

The range also gets two new transmitters; a surface mic transmitter with omnidirectional or cardioid pattern, and a tabletop base transmitter compatible with Microflex modular goosenecks.

The ULX-D digital wireless system range is aimed at the most demanding performance and fixed installations.

The ULX-D system highlights

Digital audio

The 24-bit / 48 kHz digital audio processing ensures, with a frequency response of 20 Hz to 20 kHz and a dynamic range of more than 120 dB, an incredibly faithful and accurate reproduction of sound sources.

HF performance

The ULX-D series' RF signal stability and exceptional spectral efficiency allow up to 560 compatible frequencies to be used in one frequency band in High Density mode.

Signal encryption

256-bit signal encryption ensures privacy protection - for all installations where confidentiality is essential.

Networked control

Ethernet networking of multiple receivers allows use of Wireless Workbench 6 software, frequency coordination via the Axient Spectrum Manager, system control via AMX or Crestron, and Dante™ digital audio networking (except single receiver). Remote monitoring and control capability from an iOS device with the ShurePlus™ Channel app.

Rechargeable Ion-Lithium battery

The ULX-D transmitters can be powered by a rechargeable Ion-Lithium battery allowing time remaining display in hours and minutes with +/-15 minute accuracy while providing superior battery life.

The ULX-D series is available in VHF and UHF in the V51 (174-216 MHz), G51 (470-534 MHz), H51 (534-598MHz) and K51 (606-670 MHz) frequency bands.

Handheld transmitter equipped with a Dualdyne KSM8 dual diaphragm dynamic capsule with cardioid polar pattern. Interchangeable capsule. Powered by two LR6 batteries or with an optional SB900A Lithium-Ion battery. Supplied with WA371 microphone clip. Brushed nickel finish.

General Features

- Up to 72 MHz of RF bandwidth

- Up to 70 simultaneous systems per band in standard mode

- Up to 560 simultaneous systems per band in high density mode

- Fast frequency scanning

- Interference detection and alerts

- Transmitter synchronization via IR link

- Audio frequency response: 20 Hz to 20 kHz

- 24 bit - 48 kHz A/D and D/A converters

- Latency: 2.9 ms

- Management via PC or Mac with Wireless Workbench 6 software

- Remote monitoring with the ShurePlus™ Channel iOS app

- Compatible with DTT and 4G

Features of the ULXD1 and ULXD2 transmitters

- Switchable transmit power 1, 10 and 20 mW

- Power supply by two LR6 batteries or Ion-LithiumSB900A battery

- 11 hours autonomy with two LR6 batteries

- More than 11 hours autonomy with SB900A battery (10 mW)

Features of the ULXD6 and ULXD8 transmitters

- Switchable transmission power 1, 10 and 20 mW

- Powered by AA batteries, or optional SB900A Lithium-Ion battery

- 9 hour battery life with SB900A battery (10 mW)

- Compatible with SBC250E chargers, SBC450E and SBC850E chargers

- LED indicator and configurable button

- Low-cut filter and parameter lockout

- USB port for charging and programming

- Compatible with QLX-D receivers (Except infrared)

-. Available in black or white

Single receiver features

- Digital predictive diversity

- 60 dB gain adjustable on front panel

- Audio and RF LED bar graph with peak indicator

- Encryption key activation indicator

- Audio outputs: XLR mic/line level and balanced 6.35mm jack

- RF inputs: BNC with active antenna power

- RJ45 connector: 1 Ethernet 10 / 100 Mbps port

- External power supply 240V AC - 15V DC

Additional features of dual and quad receivers

- Frequency diversity function for ULXD1 beltpack transmitters

- Audio summing function for pre-mixed outputs

- Dante™ digital audio network - AES67

- RF Cascade outputs - BNC connectors

- RJ45 connector: 2 Ethernet / Dante™ 10 / 100 Mbps / 1 Gbps ports

Frequency bands

G51: 470 to 534 MHz

H51: 534 to 598 MHz

K51: 606 to 670 MHz